IPL Laser Machine

Working Principle

IPL (Intense Pulsed Light ) is a non-invasive skin treatment that emits powerful bursts of light energy to treat unwanted hair, sun damaged skin, and wrinkles, etc. without damaging the surface of your skin. IPL systems use flash lamps to emit micro pulses of light across a broad band of visible wavelengths. By using gentle pulses of light momentarily to create heat, IPL can permanently disable hair follicles, preventing future growth. The melanin in the hair (which gives it its colour) absorbs the light, which is then converted into heat. This heat is transferred to the growth cells surrounding the root of the hair, disabling them. Similarly, IPL also achieves excellent long term results when treating thread veins, skin pigmentation, acne and other skin complaints.

E-Light is the perfect combination of MED-IPL technology with Bi-polar Radio Frequency (RF) and Skin Contact Cooling.

Radio Frequency is independent of melanin and thus independent of skin type. With Radio Frequency, increased selectivity and deeper dermal penetration would be achieved, thus lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected.  That is, less optical energy (IPL), when synergistically combined with Bi-polar RF, improves the safety factor when treating all skin types.

Meanwhile, contacting surface cooling technology applied on the treatment probe head can eliminate the heat effect attributed to optical energy, and increase the resistance of surface skin, reduce the RF absorption of the surface skin, greatly improving both the treatment performance and safety.  The technology is equally applicable and effective to mild color target tissues.

Advantages

1. Certification approved, the quality assurance and safety for use
2. Simple and Professional operation mode , meet different requirements
3. Hot sales Butterfly design appearance
4. Germany imported Heraeus xenon lamp, 5 times than other common lamps
5. Capacitors Imported from Nippon Chemical in Japan
6. 16 local languages for optional, big advantage for use or resell

Modes

1) 750-1200nm:   Hair Removal (Skin Type  IV)

2) 690-1200nm:   Hair Removal (Skin Type  III)

3) 640-1200nm:   Hair Removal (Skin Type  I & II ) ; Wrinkle Removal

4) 590-1200nm:   Pigmentation and Vascularity; Skin Rejuvenation

5) 560-1200nm:   Vascular and Pigmented Lesions; Skin Rejuvenation

6) 530-1200nm:   Skin Rejuvenation; Superficial Vascular Lesions

7) 510-1200nm:   Superficial Vascular Lesions

8) 480-1200nm:   Light Pigmentation

9) 430-1200nm:   Acne

10) RF Treatment:  Skin Tightening and Face Lifting

Technical parameters

Wavelength (Spectrum)	430/530/640-1200nm (standard) 480/560/590/690/750-1200nm (optional)
Energy Density (Fluence)	10-60J/cm2
RF Energy	Up to 50W
Spot Size	15x35mm² interchangeable
Pulse Repetition Rate	0.2Hz; 2Hz
Pulse Duration	0.5-15ms
Pulse Delay	1-50ms
Pulses	1-15 pulses
IPL Peak Power	1400w
RF Power	Max. 100W
Cooling	Continuous Crystal contact cooling (-4℃~2℃ ) + Air cooling + Closed water circulation cooling
Stand-by Working	Continuously for 18 hours
Display	8.4″ True Color LCD Touch Screen
Electrical Requirements	100-240VAC, 20A max., 50/60Hz
Net Weight	27 kgs
Dimensions (WxDxH)	52*60*37cm